During the renovation, many people chose custom wardrobes and sliding doors. Because customization allows consumers to choose their own size and style, a greater level to meet the needs of consumers. But when ordering, we must also pay attention to six things. Brand Shop: Grande Sliding Door Wardrobe   Da Vinci sliding door wardrobe One: Profile There are basically two types of material used for sliding doors: one is aluminum alloy and the other is plastic steel. Due to its light weight and high strength, aluminum alloys are high-grade materials for sliding door substrates. Has gradually replaced the steel products. The aluminum alloy itself is divided into ordinary aluminum-magnesium alloys and smaller aluminum-magnesium alloys for special aviation use. Due to the higher strength and lower weight of Al-Mg-Ti-Si alloys. Therefore, it is deeply favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloys. When looking at the profile, not only the substrate but also its surface treatment must be observed. Advanced surface treatments include anodic oxidation, electrocoating, carbon coating, etc. These processes have higher hardness and aesthetics than simple spraying and plating. The film thickness of the electrophoretic coating used by KD in the United States reaches 20 μm, and the adhesion rate reaches the highest international level 0, which has unmatched scratch resistance. Two: top and bottom rails When choosing the sliding door, try to choose the same material as the top and bottom rails, that the top and bottom rails are load-bearing parts. To withstand repeated friction, so the top and bottom rails must be high strength, wear resistance, the top and bottom rails are using aluminum magnesium magnesium titanium alloy strength, anti-deformation ability, can have a longer service life. Three: top and bottom wheels The top and bottom wheels are important parts for sliding doors. Pay attention to the selection of high-quality bearing pulleys. The exterior of the bottom wheel is made of fiberglass material, which features high strength, wear resistance and low noise. Use push-pull more than 100,000 times, the wheel body adopts three-degree polishing plating, never rust. Four: rubber strip The main materials popular in the market are PVC rubber, silica gel and so on. The silicone strips are made of non-toxic, non-corrosive silicone material. It also maintains good toughness at very low temperatures and ensures flexible connections between the sheet and the profile. Five: sheet, substrate The leeks commonly used in cabinet panels are blockboards, density boards, and moisture-proof chipboards. One of the most cost-effective is the moisture-proof particleboard, which has the advantages of light weight, high strength, strong nail holding force, but the moisture-proof particleboard also has different qualities. Six: glue, edge band, veneer The edge band mainly seals the section of the sheet. To avoid damage to the board from the environment or the use of unfavorable factors (mainly moisture). Also achieve decorative effect. Ordinary glue will have a pungent odor due to the presence of formaldehyde, and there is also the danger of cancer. Therefore, pay attention to whether or not the cabinet smells when purchasing. Links: Select the four details of furniture concerns Furniture purchase aluminum alloy glass decorative furniture glass furniture glass door glass door glass 