Specification
Name: 6000 series Aluminum Sheet
Alloy: 6061, 6082, 6063 etc. Temper: O, H112, T4, T6, T651 etc. Thickness: 6-200mm Width: Up to 1500mm Surface treatment: mill finished, Print marks
Feature
Machinability: In the harder T 4 and T6 tempers it is good. It is notably less easy to machine in the annealed temper.
Forming: Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods. Welding: It has very good welding characteristics and may be welded by all of the common welding techniques. Heat Treatment: Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling. Forging: It is capable of being hot forged at temperatures in the range of 900 F to 750 F. Hot Working: Hot working may be done in the temperature range of 700 F to 500 F. Cold Working: Cold working in the O temper condition is readily performed. The alloy is notably less easy to cold form in the T 4 and T 6 tempers. Annealing: Annealing should be done at 775 F for 2 to 3 hours followed by controlled cooling at 50 f per hour down to 500 F, then air cool. Aging: The aging precipitation heat treatment is done at 350 F for 8 hours followed by air cooling. This produces the T6 temper.
Application
Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, pipelines, various toolings etc.
Â
Alloy
Chemical Component %≤
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
others
Al
single
total
6061
0.4- 0.8
0.7
0.15-0.4
0.15
0.8- 1.2
0.04-0.35
\
0.25
0.15
0.05
0.15
remainder
6082
0.7- 1.3
0.5
0.1
0.4- 1.0
0.6- 1.2
0.25
\
0.2
0.1
0.05
0.15
remainder
6063
0.2-
0.60.35
0.1
0.1
0.45-0.9
0.1
\
0.1
0.1
0.05
0.15
remainder
Contact
Ms. Sunny Mao
Â
Mobile:86-18660566415
Company introductions:
Our packing:
Welcome to contact me for more information and solution.
Â
Â
Web:www.ytbaodi.com
China Aluminum Alloy Sheet and Plate Metal Price for 6061 6082, 6063, 6262 From Factory
Model NO.: 6061, 6082
Trademark: BAODI
Specification: 4′*8′
Origin: China
HS Code: 760612
Our company produce aluminum sheet and plate 6061-T6,6082-T,more than 3000tons stock ,no Minimum orders,standard size.Cut to size for you.Aluminum sheet has very good machinability.Pls see the details: