Plastic Hiflow ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance. The grid structure guarantees its opening pore ratio exceed 50% and bed void fraction is higher than same size's pall ring. In addition, large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring. Vertical bar staggered distribution and reinforced horizonal stripe largely improve its rigidity and strength. It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on. Product name Plastic hiflow ring Material PP, PE, PVC, CPVC, PVDF, etc Life span >3 years Size Surface area m2/m3 Void volume % Packing density Kg/m3 Inch mm 1/2" 16 260 91 80 1" 25 210 92 79 1-1/2" 38 140 94 58 2" 50 100 94 54 3-1/2" 90 73 96 33 Feature High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. Advantage 1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. Application These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 150°. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C. Performace/Material PE PP RPP PVC CPVC PVDF Density(g/cm3)(after injection molding) 0.98 0.96 1.2 1.7 1.8 1.8 Operation temp.(ºC) 90 >100 >120 >60 >90 >150 Chemical corrosion resistance GOOD GOOD GOOD GOOD GOOD GOOD Compression strength(Mpa) >6.0 >6.0 >6.0 >6.0 >6.0 >6.0 Our Factory assure all tower packing made from 100% Virgin Material. 1. OCEAN SHIPPING for large volume. 2. AIR or EXPRESS TRANSPORT for sample request. Package type Container load capacity 20 GP 40 GP 40 HQ Ton bag 20-24 m3 40 m3 48 m3 Plastic bag 25 m3 54 m3 65 m3 Paper box 20 m3 40 m3 40 m3 Delivery time Within 7 working days 10 working days 12 working days  Plastic Hiflow ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance. The grid structure guarantees its opening pore ratio exceed 50% and bed void fraction is higher than same size's pall ring. In addition, large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring. Vertical bar staggered distribution and reinforced horizonal stripe largely improve its rigidity and strength. It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on. Product name Plastic hiflow ring Material PP, PE, PVC, CPVC, PVDF, etc Life span >3 years Size Surface area m2/m3 Void volume % Packing density Kg/m3 Inch mm 1/2" 16 260 91 80 1" 25 210 92 79 1-1/2" 38 140 94 58 2" 50 100 94 54 3-1/2" 90 73 96 33 Feature High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. Advantage 1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. Application These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 150°. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C. Performace/Material PE PP RPP PVC CPVC PVDF Density(g/cm3)(after injection molding) 0.98 0.96 1.2 1.7 1.8 1.8 Operation temp.(ºC) 90 >100 >120 >60 >90 >150 Chemical corrosion resistance GOOD GOOD GOOD GOOD GOOD GOOD Compression strength(Mpa) >6.0 >6.0 >6.0 >6.0 >6.0 >6.0 Our Factory assure all tower packing made from 100% Virgin Material. 1. OCEAN SHIPPING for large volume. 2. AIR or EXPRESS TRANSPORT for sample request. Package type Container load capacity 20 GP 40 GP 40 HQ Ton bag 20-24 m3 40 m3 48 m3 Plastic bag 25 m3 54 m3 65 m3 Paper box 20 m3 40 m3 40 m3 Delivery time Within 7 working days 10 working days 12 working days  Laser Cutting Decorative Panel
Laser Cutting Decorative Panel Laser Cutting Decorative Panel,Decorative Steel Privacy Panel,Metal Laser Cut Panels For Cladding,Metal Laser Cut Panels For Garden HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.comProducts Introduction of Plastic Hiflow Ring
Technical Specification of Plastic Hiflow Ring
2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Physical & Chemical Properties of Plastic Hiflow Ring
Material
 Shipment for Products
Packaging & Shipping
Products Introduction of Plastic Hiflow Ring
Technical Specification of Plastic Hiflow Ring
2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Physical & Chemical Properties of Plastic Hiflow Ring
Material
 Shipment for Products
Packaging & Shipping
wall, ceiling, Kitchen equipment Specially for bar,club,hotel,bath center,villa,shopping mall.
(1)Easy to install
(3)Good whiteness,transparency, refractivity and hardness
(4)No pollution or radiation to the environment
(5)Standard: High-quality;
Hiflow Ring Hi-Flow (PP, PVC, PE, CPVC, ETFE, PVDF)
Origin: Pingxiang, China
Origin: Pingxiang, China
Product Type
Room Divider,Partition Screen, Laser Cut Screen,Sliding/ Folding Screen ,Wall Panel Screen
Finish
Powder coated/ wood color
Fabricating Method
Laser cutting hollow-out, Cutting, Welding, Hand Polishing
Pattern
Customized Design available
Application
Decorative Living Room, Hotel, Bar, etc. Indoor and outdoor public space backdrop Elevator cabin, handrail,living room, background
Specifications
(2)Up and down can add color light will improve the performance
(6)Characteristics: strong, stylish, durable, corrosion-resistant.