Subway evacuation and emergency measures

Emergency treatment method for subway encountering dangerous situations

1. If the passenger is caught by the shield door, the clamped passenger can immediately open the shield door by operating the emergency unlocking device inside the shield door, and the passenger in the train can pull down the emergency unlocking device next to the door to open the door. In addition, emergency stop buttons are installed at both ends of each platform. In an emergency, passengers can press the emergency stop button to force the train to stop; in non-emergency situations, do not touch the subway emergency device.

2. When a poison gas attack occurs in the subway, passengers should use handkerchiefs, napkins, clothing and other items soaked in them to block the mouth and nose, and cover the bare skin; judge the source of the poison, and quickly run away from the source of the poison, orderly Go to the place where the air circulates or the upwind of the poison source; after reaching a safe place, quickly wash the exposed parts of the body with running water.

3. In the event of a sudden fire in a subway train, passengers should keep calm, stay away from the place of fire, and use the emergency communication device in the carriage to alert the driver. Each car is equipped with a fire extinguisher, under safe conditions, passengers can use a fire extinguisher to extinguish the fire. The train will run to the nearest station as soon as possible, open the doors to evacuate passengers, please follow the staff instructions to leave the train in an orderly manner.

9 steps for subway evacuation

1. When an emergency occurs, if the train is forced to stop in the section and cannot run, the driver will appease the passengers through the broadcast.

2. Passengers in the carriage should wait for the staff's notice and evacuate according to the staff's command.

3. When it is determined that it is inoperable and passengers need to be evacuated, the staff will open the emergency escape door located in the cab.

4. The staff informs the passengers about the evacuation by broadcasting.

5. After the staff confirms that the three rails are powered off, passengers follow the instructions of the staff to enter the cab from the rear door of the cabin, and enter the rail through the escape ladder in the cab. There will be staff on site to guide passengers to evacuate between sections.

6. Passengers should follow the instructions of the on-site staff to leave the train in an orderly way and go to the nearest station via the section.

7. The staff will guide and assist passengers to evacuate towards the station at both ends of the passenger evacuation team.

8. The station staff guides passengers into the platform on the rails near the platform. Passengers should obey the staff to guide the orderly entry to the platform.

9. Passengers evacuated in an orderly manner after arriving safely at the platform. The engineering staff will enter the section to check the train failure.