What are the characteristics of Monel 400? Corrosion Resistant Monel 400 Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures. This nickel alloy is attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F. Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined. In what applications is Monel 400 used?
DMX LED Bar 2722 is dmx512 rgb led lighting, width is 27mm and height is 22mm. DMX LED Bar 2735 is dmx512 rgb led lighting, width is 27mm and height is 35mm. We offer rgb led bar dmx lighting, similiar with american dj lighting or RC lighting, the LED Pixel Bar is color changing light bar. led rgb bar, led rgbw bar is available. pixel bar have 1 led light bar, 2 led light bar, 3 led light bar, 6 led light bar. It's dmx512 programming, the address have two type, one is auto address, another is manual address. That's to say we have led bar auto and led bar manual. Auto led bar, you don't need assign dmx address, it's convenience for event show and led light rental. Manual led bar, you need assign dmx address by address writer before light up, for DJ club, architecture light, it's ok. Maybe you want to know how to install a led light bar, don't worry, we have bracket, so that you can fix the bar easily. Regarding color changing led light bar, you can control by LED Controller.
Photo show of DMX LED Bar:
Dmx Led Pixel Bar,Dmx Led Bar,Dmx Light Bar,Led Rgb Bar Shenzhen Iseeled Technology Co., Ltd. , https://www.iseeledlight.comMONELÂ Â ALLOY 400 UNS N04400
Other common names: Alloy 400
Monel 400 is a nickel-copper alloy (about 67% Ni - 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.
Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.
C
Mn
S
Si
Ni
Cu
Fe
0.3max
2.0max
0.024max
0.5max
63.0min
28-34
2.5max
Â
Explosive Monel 400+Carbons Steel Single Clad Plate Sheet
Model NO.: monel 400
Thickness: 0.2-100mm
Width: Normally 1000mm/1219mm/1500mm
Length: Normally 2000mm/2438mm/6000mm
Mtc: En 10204/3.1
Trademark: ZYTC
Origin: Tianjin, China
HS Code: 75062000
Chemical Compostion: %