Wireless Bbq Thermometer,Wireless Thermometer Probe,Electronic Wireless Digital Thermometer,Wireless Thermometer Chengdu Augus Science Technology Co., Ltd. , https://www.vluckyaugus.com
Performance characteristics:
1, the lamp has the function of opening and closing the power, making the operation more secure.
2. The use of advanced optical principles to optimize the design of transparent parts, soft light, uniform illumination, no glare, no ghosting, can effectively prevent the operator from producing visual fatigue.
3, use high-strength aluminum alloy shell, special sealing and surface coating treatment, can be used in long-term use in high temperature and humidity and various corrosive and harsh environments.
4, seat type, ceiling type and ceiling type and other installation methods, suitable for different job site lighting needs.
5, according to customer needs with a lamp cover.
Instructions:
1. Determine the installation location of the lamp, select the appropriate installation method, and press the lamp to the distance of the 220V power contact point, and prepare the corresponding length of the φ6~8mm three-core cable;
2. Open the back cover by pulling the two locks on the lamp holder. Pass one end of the prepared three-core cable through the inlet, and connect the live wire (L) to the “L†terminal. The neutral wire (N) is connected to the cover. On the “N†terminal, the ground wire (PE) is connected to the “PE†terminal. After the cable of the inlet is pressed with the compression nut, the back cover is closed, the latch is fastened, and finally the three-core cable is connected. The other end is turned on to achieve lighting.
3. When replacing the bulb, open the rear cover according to the method of use. 2. Turn the lamp holder clockwise and gently pull it out of the lamp cover. Unscrew the old lamp on the lamp holder and replace it with a new one.
4, installation:
Ceiling Mounting: First use four M8 bolts to fix the lifting adapter plate to the lamp. Connect the three-core cable through the G3/4 pipe thread opening, through the round hole on the side and the introduction port on the lamp holder side. On the luminaire, the G3/4 pipe thread of the luminaire is then screwed together with the wiring pipe with standard G3/4 pipe thread.
Ceiling installation: According to the installation hole size of the lamp, the corresponding bolt hole is to be installed at the position where the lamp is to be installed and fixed with the M8 bolt.
5, multiple lights in parallel.
Anti-glare Floodlight Features and Usage Analysis
Anti-glare floodlights are widely used in various indoor main plant, pump room, boiler room, gallery, trestle, furnace body, coal warehouse and other places for fixed lighting. Light sources and electrical appliances all use international famous brands, and their performance is reliable. The brightness is about 20% higher than similar products.