Living room ceiling aisle ceiling outlet switch bathroom Atomized glass adopts the principle of full patent technology, attaches new liquid crystal material to basic materials such as glass and film, and uses circuit and control technology to make dimming glass products. Atomized glass can be applied in a variety of themed locations. Atomized glass is also called electronically controlled atomized glass, which uses electricity to adjust the transparency and degree of atomization of the atomized glass. The use of intelligent atomized glass on the showcase: with bullet-proof glass, the electricity is transparent when the display is used. In the case of robbery threat, it can be directly controlled by remote control and atomized instantly, so that criminals lose the target of coercion and protect the life and property safety of personnel to the greatest extent. Intelligent atomized glass in the bathroom, toilet use: according to user needs, change the transparency, protect the privacy, but also make the space better visual impact. Intelligent atomized glass is used in office partition: it can achieve the secret function of meeting instantly and improve the overall image of the company. Brand Store Smart Glass,Window Advertising Glass,Showroom Door Glass,Brand Store Door Glass,Exhibition Hall Windows Glass,Display Window Glass Smart Tianqixun Technology , https://www.tqxdisplay.com
2. After the completion of the waterproofing project, a 24-hour storage test must be done.
Third, the power cord and the telephone line or network cable must not penetrate the same line tube. The horizontal distance between the power cord and socket and TV line and socket should not be less than 500mm.
4. A waterproof socket shall be installed in the toilet room and the switch shall be installed on the wall on the open side of the door.
5. Lines laid on the chisel wall or on the ceiling must be equipped with a sheath pipe. It is forbidden to directly bury the conductor in the plaster layer. The conductor shall not have joints and kinks in the pipe, and there shall be no exposed conductor in the ceiling.
Sixth, the general socket uses 2.5mm2 section and must design the grounding line, the air conditioner, the water heater and so on uses 4.0mm2 section.
New house mid-term acceptance simple steps
First, the waterproof layer should extend from the ground to the wall, 250mm above the ground. The height of the waterproof layer on the bathroom wall should not be less than 1800mm.