Tenth of the decoration process: install the finished product door

Before the floor is installed, you must do a leveling. Prepare a little pepper in advance. Do not buy so-called insecticide powder brought by floor workers. Let them sprinkle along the kicking corner. Workers must be required not to cut the floor in the house, cut in the corridor, and finally clean the corridor. ...

Install a series of hardware such as drying racks, curtain rods, lamps, sanitary ware, and sanitary ware, preferably before installing the floor. When the items with a lot of ash are scattered, one can easily install the floor. ...

The greatest manifestation of cleaning is glass cleaning. Followed by the floor waxing, wax to buy their own, cheap and easy to use, but must use a cleaning waxing machine, efficiency is tens of times faster than artificial, hundreds of times. The rest doesn't need to rely too much on cleaning. They also use small blades to scrape here and scratch there, not so much. Therefore, after the cleaning goes, it's best to do a thorough cleaning again. Go to the supermarket to buy a bag of "five clean powder" and get a few old towels. With an old towel, stained with dry five clean powder ...

In a new home, furniture bears the brunt. Beds, mattresses, wardrobes, shoe cabinets, sofas, dining tables, etc. Before the furniture enters the market, you should prepare the following items: disposable shoe covers (do not buy poor quality, step on the break), a few boxes of activated carbon, ladders, floor protection film (carrying closet, TV cabinet, etc. protection). If you buy a fabric bed, remind you to see if the fabric can be taken down. Home appliances quickly delivery, tight or not in a hurry to wait and so on. anti...

1. The choice of geothermal floor is recommended to choose composite flooring. Because the thickness of the composite floor is mostly 7~8mm, it is easy to transfer the heat generated by the geothermal system to the surface, and the surface of the composite floor is a wear-resistant layer of metal oxides. The heat spreads very quickly and evenly on the surface. The solid wood floor is relatively thick, the general thickness of 2cm or so, but also to install the keel, so the heat of the geothermal system is not easy to transfer to the surface, and the thermal conductivity of the wood ...