[China Aluminum Network] The aluminum grille plays an important role in the decoration. So what issues need to pay attention to when making the aluminum grille? Let's take a look at some basic things that Alcoa needs to pay attention to when installing Azi. Reflective Sticker,Reflective Patches,Safety Sticker Jinyang Industrial Corporation., Ltd. , http://www.dmreflectives.com
Rely on the front and first according to the design requirements to guide the control line of the ceiling elevation and the control lines related to the model, tuyere, and block, etc. from the +50? line, and then proceed with the installation of the boom and the skeleton. This is very important during the installation process and is also very important for installation.
The second article adopts six Yuansteels for the suspenders, which can be welded with the original suspenders according to the position of the suspenders in the elastic line. And brush two anti-rust paint, when the width of the top of the wind tunnel or obstacles exceed 1.2 meters, please refer to the following diagram, the distance between the suspenders should not exceed 1.2 meters.
Article 3: Hanging type bolts are used to connect the boom to the keel. When the keel is installed, the top part of the keel should be firmly fixed to the wall surface and the cylindrical surface. The mounting of the keel is performed one by one from one end to the other, and the various connectors should be installed securely. Pay attention to the height of the boom and ensure the elevation. Aluminum side plate installation: When installing, arrange the line according to the elastic plate, install it from one direction, install it, push the keel from the side of the aluminum plate, then insert the other side of the plate into the installation. Handle gently with your hand, and ensure that the board will not be any damage.
The above are some basic issues that need attention when installing aluminum square pass. I hope the above information can help the majority of decorating employees.