Because many merchants regard the thickness of the gusset as a reason to sell high prices, and consumers are convinced. As everyone knows, the quality of aluminum gussets has nothing to do with thinness, but depends entirely on the material. Because the inferior aluminum gusset plate can not only be thin and easy to rust and peel off, it is very affecting the future use. Therefore, the first step of purchasing the integrated ceiling must be to understand the material of the gusset. A. Laminating board: Generally, the national standard aluminum is used. The board is treated with anti-oxidation, the surface is treated with imported peritoneum, and the color effect is much. This kind of board is the most common sales volume on the market, and its sales price is also According to the grades of each brand and the substrate used, the non-general professionals are basically difficult to distinguish. According to the industry, in addition to the normal comparison, the sales price can truly reflect the quality of the product. difference: 1:30 -38/square: (The product of this price segment uses recycled aluminum or even iron aluminum as the substrate, generally does not do high-cost anti-oxidation treatment, the surface is generally used for spraying or general peritoneal treatment. Rough work The four corners are not equal. Generally, the thickness of the substrate is determined by the price difference of 04-0.55. Therefore, the production cost is low, and the engineering and the urban and rural areas of remote cities are the sales channels. For a long time, the surface is prone to discoloration and even the surface is oxidized and rust bubbles appear! 2:40 -50 / square: (In addition to the surface peritoneal effect, basically have the same material characteristics, and will not do high-cost anti-oxidation technology treatment, the product has basically no relevant product quality inspection and other qualified product identification ( Basically, only the brand LOGOU stencil is used to distinguish. According to the survey of professionals, this kind of supply is basically basically obtained by stamping the base material from the processing plant in the suburbs of Changsha. The actual thickness is generally below 0.6. The so-called 0.7 0.8 product is quite small. In the market, the second and third line of low-end and mid-end brands are the main sales, and the prefecture-level city of the company is used as the sales channel. Therefore, consumers in general products are difficult to distinguish the difference. They are often misled by many brand sales personnel in terms of surface color pattern thickness and other false sales. Finally, they are tempted by price advantage, allowing consumers to purchase water products that are worthless. Because the kitchen and bathroom space has corrosive fumes and water vapor evaporation effect, if it is not treated with anti-oxidation (non-standard products are used for 1-5 years), the surface of the board will change color for a long time, and there will be oxidation phenomenon such as rust bubbles on the surface. ! 3:60-80/square: the national standard aluminum substrate is used, the surface is imported peritoneum, and the bottom plate is treated with high cost technology of anti-oxidation treatment (anti-oxidation treatment cost reaches 13/square). Its regular brand products work fine surface color balance Bright. The bending strength of the substrate is stronger than that of non-standard products. The four hem angles of the hard board surface are uniform and the symmetry angle is very fine. The thickness is 0.6. The medium and high-end brands will measure the difference between non-standard and national standard according to the national product inspection standard procedure. . The basic qualified products all have the brand LOGOU (four sides), the bottom plate generally has a laser anti-counterfeiting trademark, the product production batch barcode, the whole package has a professional quality inspection employee number inspection and other instructions. (General normal use period can reach 15-20 years or more) In order to avoid later worries, the cost gap is not large. It is recommended to purchase such price products. B. Roller coated plate: The price of national standard product is tens higher than that of peritoneal plate. The basic contrast characteristics are basically the same as that of laminated film. The substrate is the same, but the plate surface is treated with repeated high temperature baking anti-oxidation technology. Finally polished. Generally, it is more effective in monochrome products, and there are also some gorgeous color panels that are processed and processed by the brand on the surface of the roll-coated finished product. C. Anodized plate: It is the legendary brushed aluminum. The plates are made of high-quality alloy base aluminum with aluminum and manganese. Generally, the base material silver product can also be imported into the color plate molding board processed by the anti-oxidation technology of the paint. These products are characterized by high quality such as abrasion resistance, corrosion resistance, corrosion resistance and high temperature, and are also commonly used for medium and high-end products. There are also many classifications of products: anti-scratch series nano-plate series anti-fouling series. The high-end products of this material are generally difficult to oxidize and discolor for 30 years. D. Imported titanium alloy: The base aluminum adopts imported titanium alloy plate which is often used in the manufacturing of aircraft aviation high-end equipment technology. (The production process is produced with high technical efficiency, so few brands generally use this material), the double-sided gusset plate is treated by fine-plated wire drawing, and the texture feel of the hand feel is 0.5% of the international standard thickness. reflect. The general price of the product is above 600/square, so there is no need to worry about its quality. Because many merchants regard the thickness of the gusset as a reason to sell high prices, and consumers are convinced. As everyone knows, the quality of aluminum gussets has nothing to do with thinness, but depends entirely on the material. Because the inferior aluminum gusset plate can not only be thin and easy to rust and peel off, it is very affecting the future use. Therefore, the first step of purchasing the integrated ceiling must be to understand the material of the gusset. Concerned about surprises Label: How to determine the material of the gusset? Previous: Fire door closer installation instructions Next: What are the advantages of cork laminate flooring, how to use it
PP pipe and fitting is made by material polypropylene, it can be used for both water system and industrial application, PP Pipe Fitting has good mechanical properties, good chemical properties, good heat resistance, good electrical insulation, non-toxic.
Ningbo RMI Plastic Co.,Ltd produce PP pipe fitting, PP-H pipe fitting and PP-GF pipe fittings according to standard DIN 8077/8078, pressure rate PN10, SDR11 and PN6, SDR17.6 size from 20mm to 500mm.
PP pipe and fitting includes: PP coupling, PP elbow, PP tee, PP flange, PP reducer, PP end cap, PP union, it is suitable for water supply, water treatment, chemical industrial, steel factory acid pickling system, chlor alkali industry, pharmaceutical industry, etc.
PP Pipe Fitting PP Pipe Fitting,PPH Pipe,PPH Pipe Fitting Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com