Water in the toilet has become one of the household problems that often plague us. What are the reasons why the toilet does not fill water ? How can we solve it? Next, let's take a look through the following content, specifically! The possibility that the toilet does not fill the water may be that there is an inverted cup of water inside it that is stuck. The toilet bowl is not filled with water . Open the lid of the toilet. Check whether the float ball sinks to the bottom when the water tank is empty. If it is still at the top when there is no water, it means that the float ball is broken and cannot sink. As a result, the water inlet is always closed, so there is no water. , You can also repair other reasons, whether the triangle valve is in the open state, remove the triangle, check whether the connection with the inner wire in the wall is blocked by the raw material, open the triangle valve spool open and close is normal, on Whether the water hose is unobstructed or not, then something else can be eliminated. If all of them are normal, then you should consider the problem of the water pipe and whether the welding is blocked during construction. If the toilet does not fill the water, the valve on the hose connected to the water tank is closed. Then flush the toilet and drain the remaining water from the tank water. The flush toilet is not filled with water and the lid with the button is opened. There is a float inside to see if it is stuck. There is a problem with the situation where the flush toilet is not filled with water and the tap is low. The toilet replenishment device, which is a little better, also has a filter inside. The filter screen is blocked by too much scale for a long time so that the tap water cannot enter. Just remove the filter and clean it. Solution: Use a toothbrush or the like to clean the filter. It is better to have a scale cleaner. No problem is not a problem. I just use a descaler to add water to the filter for a while. It's particularly clean. I can also fill the mixture with some water in the replenishment device. Scale removed. All clean. The toilet does not enter the water along the inlet hose. Look under the toilet. There is a hex nut connecting the hose to the hydrant in the tank (a standing plastic tube). Turn the nut with a wrench and follow it. Just looking up from the position of the nut, there may be one that is in the same position as the nut, which is also rotatable and has the same function. It is also unscrewed. After two processes, the water replenishing device can be taken out of the toilet. Regarding the flush toilet , I will introduce it to you. I hope to help you, and I would like to look forward to this website. Toilet toilet blocked how to do children's toilet toilet toilet baby toilet toilet child toilet toilet toilet toilet for children Double Tile-flange Bathtub Alcove Tub,Bathtubs Canada,Skirted Bathtubs,Two Sided Apron Bathtub Ningbo Waltmal Sanitary Wares Co., Ltd. ,