Cable tie is used to tie things together. According to the material, it can be divided into nylon cable ties, stainless steel cable ties, plastic-sprayed stainless steel cable ties, etc.; according to the function, it can also be divided into ordinary cable ties, retractable cable ties, label cable ties, heavy tension cable tie, etc. The cable tie is made of UL-approved nylon 66 material with a fire rating of 94V-2. It has the characteristics of acid resistance, corrosion resistance, good insulation, resistance to aging, light weight, safety, non-toxicity, and strong durability. Operating temperature is minus 40 to 90 degrees.
Cable Tie,Nylon Cable Tie,Plastic Cable Tie,Pound Zip Cable Ties Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>How to adjust the radial bearing clearance Ways to adjust the radial bearing clearance
The usual methods for adjusting the radial bearing clearance are as follows: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. For the backlash of the cylindrical and elliptical bearing bushes; it can be adjusted by means of hand-grinding or scraping of the bearing and the flat-faced surface after turning and turning.
2. For the top clearance of cylindrical and elliptical bearing bushes; it can be adjusted by means of hand-grinding or scratching or adjusting the condition of the bearing bisector.
3. For the multi-oil wedge fixed bearing bush; in principle, it is not allowed to repair and adjust the bearing bush gap; if the gap is not suitable, the new tile should be replaced.
4. For multi-oil wedge tilting bearing bush; do not allow to repair the tile; if the gap is not suitable, the tile should be replaced. The tile with adjustable thickness can be added by adding stainless steel pad under the adjusting block on the back of the tile; Thin adjustment block thickness method to adjust the amount of wattage. Pay attention to the multi-oil wedge tilting bearing bush; the thickness error between the same group of tiles should be less than 0. 01mm.
Recommend to friends comments close window Bearing related knowledge A method for online correction of paper machine bearings. Application and protection of deep groove ball bearings. Correct use of "TIMKEN cylindrical roller bearing smooth grease" method. Online monitoring skills of rolling bearings: Iron spectrum analysis protects bearings from "brightness"
This article links to http://
Please indicate the bearing network http://
Previous:The seal of the bearing itself:The following: The characteristics and application of the hybrid ceramic bearing
Ways to adjust the radial bearing clearance
Source: China Bearing Network Time: 2013-06-30