A metal cutting machine (referred to as a machine tool) that processes various metal workpieces by cutting, grinding or special machining methods to obtain the required geometry, dimensional accuracy and surface quality of the machine (except hand-held). This 200*1000mm wood Look tiles uses high quality glazed material and digital printing technology, so it has fine,dynamic and smooth surface texture, and looks more like real wood. Compared with the real wood, wood look porcelain tiles are popular in the house decoration and projects.Because it has many characteristics: Wooden tiles design for living room,Wooden tiles vitrified,wooden tiles garden,Wooden tiles indoor,Wood look tile bathroom Foshan Castel IMP&EXP Co.,Ltd , https://www.fscastel.com
A metal cutting machine (referred to as a machine tool) that processes various metal workpieces by cutting, grinding or special machining methods to obtain the required geometry, dimensional accuracy and surface quality of the machine (except hand-held). It is a wide-ranging and wide-ranging equipment. Its structural characteristics, processing accuracy, automation, working conditions and environmental conditions are very different. There are different requirements for the lubrication system and the lubricant used.
Machine lubrication characteristics and requirements:
1. The main components in the machine tool are mostly mechanical parts, standardized and generalized, and the degree of serialization is high. For example, sliding bearings, rolling bearings, gears, worm gear pairs, rolling and sliding guides, screw drive pairs (screw nut pairs), clutches, hydraulic systems, cams, etc., have different lubrication conditions.
2, the use of machine tools Environmental conditions: machine tools are usually installed in indoor environment, the summer ambient temperature is up to 40 ° C, when the winter temperature is below 0 ° C, more heating, so that the ambient temperature is higher than 5-10 ° C. High-precision machine tools require a constant temperature air conditioning environment, generally around 20 °C. However, due to the high precision and automation of many machine tools, the requirements for viscosity, oxidation resistance (life) and oil cleanliness of lubricating oil are strict.
3. Working condition of machine tools: Different types of machine tools of different specifications and sizes, even on the same machine type, the working conditions are very different due to the different processing parts. The requirements for lubrication vary. For example, the grinding wheel spindle bearings of high-speed internal grinding machines and the heavy-duty, low-speed spindle bearings of heavy-duty machine tools have very different requirements for lubrication methods and lubricants. The former requires lubrication with an oil mist or oil/gas lubrication system, using a lower viscosity lubricant, while the latter requires lubrication with an oil bath or a pressure cycle lubrication system, using a higher viscosity oil.
4. Adaptability of lubricating oils and lubricating coolants, rubber seals, paint materials, etc.: Lubricating coolants are used on most machine tools. In lubricating oils, oils are often emulsified and deteriorated due to the mixing of coolant. The parts are rusted, etc., causing the rubber seal to expand and deform, causing the surface of the part to paint bubbles and peel off. Therefore, the compatibility of oil and lubricating coolant, rubber seals, paint materials, and oil leakage prevention are considered. In particular, as the degree of automation of machine tools has increased, lubricating/cooling general-purpose oils have been used on some automation and CNC machine tools, both as lubricating oils and as lubricating coolants.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
1.stain resistant, scratch resistant, fire resistant and easy to maintain and clean.
2.Less than 0.5% water absorption,super waterproof and moisture-proof
3.Green and environmentally friendly comparde with using real wood flooring.