Dialysis of the misunderstanding of modern wooden furniture

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

Misunderstanding 1: Only solid wood is good

Many customers see a product in the furniture store. The first sentence is to ask if it is all solid wood? As soon as I heard the negative answer, I turned away. In fact, this is because they lack understanding of modern panel furniture.

Modern panel furniture corresponding to traditional solid wood furniture is centered on artificial panels. In the most commonly used MDF, it is made of wood fiber or other vegetable fiber, adding an adhesive such as resin, and the artificial plate is made after high temperature and high pressure. In terms of materials, MDF is dense in texture, large in thickness and density, large in weight-to-weight ratio, low in moisture content and not easily deformed. It is the most versatile high-quality furniture sheet in the world. From the aspect of the veneer, the natural veneer is not only natural and beautiful, but also has a certain thickness (0.3-0.6mm), which has a good protection for the home. Therefore, solid wood edge sealing and veneering are the highest level of plate furniture, even if imported high-grade European furniture. Solid wood is generally only used in small parts such as wood strips and edge seals. On the other hand, whether it is traditional furniture or modern furniture, the wood used has obvious high, medium and low grades due to factors such as its material, texture and resources. Low-grade solid wood is not as valuable as high-grade veneer. In particular, many medium and low-grade solid woods are not suitable for dehydration treatment (wood for furniture usually requires kiln drying and relative moisture content of 10%-12%). After making furniture, there is a great chance of deformation and bursting. And high-end solid wood furniture is often expensive.

In short, the biggest advantage of the plate type is that the mechanical properties are generally superior to solid wood. The reason why customers have this kind of mentality is not completely wrong. "There is no aldehyde and no plate."

Objectively speaking, from the perspective of “environmental protection”, the VOC content of solid wood is much lower than that of slabs. From the perspective of “global environmental protection”, the use of plates to alleviate resource constraints to a certain extent is conducive to sustainable development.

There are also many solid wood and veneer used in modern wood furniture. The following are common in the Guangdong market:

1. Black walnut, the highest quality of walnut wood, mainly produced in North America and Europe.

Domestic walnuts are lighter in color. The black walnut is light dark brown with purple, and the string cut surface is a beautiful large parabolic pattern (large mountain pattern). Black walnuts are very expensive, furniture is usually made of veneer, and solid wood is rarely used.

2, cherry, imported cherry wood is mainly produced in Europe and North America, the wood is light yellowish brown, the texture is elegant, the string cut surface is medium parabolic pattern, there is a small circle pattern. Cherry wood is also high-grade wood, furniture is also commonly used veneer, rarely used solid wood.

3, beech, the coffin here refers to the beech, and the Chinese traditional furniture in the "Nanbeibei" coffin is two different things. The color of the eucalyptus is bright and light yellow, with dense "needle" (wood ray) and a mountainous pattern. There are fewer imported beech in Europe, which is much better than domestic ones. Imported eucalyptus is a medium-to-high-grade wood in China. It is commonly used as veneer, and solid wood is also used as a dining chair and small square bars.

4, maple, maple color is light yellow, with a hill pattern, the biggest feature is the "shadow" (partial luster is obvious). Maple is a mid-range wood, and veneer and solid wood are common.

5, birch, birch color is light yellow, easy to distinguish features are more "waterline" (black line). Birch is also a mid-range wood, both solid wood and veneer.

6, rubber wood, the primary color is light yellow brown, there are messy small rays, the material is light and soft, is low-grade solid wood materials. Merchants call it "oak", which is really a trick of fish. Real oak is more expensive. The European white oak has an elegant texture, and the North American red oak has a large mountain pattern. Both of them are hard and heavy, and the appearance, structure and material are all incompatible with the rubber wood.

Others such as pine, fir, eucalyptus, etc., are relatively low-grade furniture materials.

Misunderstanding 2: Confusion of solid wood, veneer and stickers

Since the development of modern wood furniture, it has formed a large market pattern with diverse styles, complete varieties and complete grades. While diversified markets offer a wealth of choices, they also have problems that are mixed and difficult to distinguish. As a customer, be sure to keep your eyes open when you buy.

Solid wood is mostly used for varieties and parts with less material, and precious wood rarely uses solid wood. For example, solid wood dining chairs are more common, but generally used in the middle and high-grade imported beech, mid-grade maple, birch, domestic eucalyptus, low-grade rubber wood. If someone tells you that he is selling "imported black walnut solid wood dining chair", five or six hundred yuan, then he must be in you. Most of the chairs were painted in black walnut with birch paint, which is common in both the Chinese and foreign furniture industry. However, it was originally intended to save costs and harmony, but it was used to cross the sea and had to be prevented.

There are many modern panel furniture facing materials, among which veneer and stickers are very common, but the grades are completely different. The veneer furniture is rich in natural texture, beautiful and durable, but the price is relatively high, and the sticker furniture is easy to wear, afraid of water and unbearable, but the price is low and it is a popular product. Some types of furniture that are not worn out and are not close to water sources are currently mainly based on stickers, such as shoe cabinets and bookcases.

When customers visit the furniture store, they will see instructions such as “walnut floor cabinet”, “cherry wood coffee table” and “wooden dining chair” on the price plate. At this time, it is very important to figure out whether it is solid wood, veneer or sticker. Solid wood and veneer can be called “cherry wood furniture”, but the sticker can only be called “cherry wood furniture”, otherwise it will be a fish.

Solid wood --- wood grain, wood ray (if usually expressed as "needle") is clearly visible, more or less should have some natural cockroaches (wood knots, wood plaques, black lines, etc.). The same piece of solid wood, whether it is wood or wood, its two interface wood grain should be able to clearly see the natural connection between the longitudinal section and the cross section.

Veneer – wood grain and wood rays are clear. There should also be natural flaws. Because the veneer has a certain thickness (about 0.5mm), when the furniture is made, it encounters two adjacent interfaces. Usually, it does not turn, but each piece is attached, so the wood grain of the two interfaces should not be connected.

Stickers—Wood grain and wood rays are clearly visible. Even imported high-grade paper can be counterfeited even with wood, but it is different from natural veneer. Sticker furniture is easy to reveal flaws at the corners. In addition, because the thickness of the grain paper is very small (0.08mm), it will be directly wrapped at the junction of the two planes, causing the wood grain of the two interfaces to be connected (usually the longitudinal section).

4, soft furniture mainly refers to sofas, bed furniture.

sofa

(1) The American sofa, the biggest charm of the American sofa is very soft and comfortable, letting people sit and feel like being embraced gently. Many sofas are currently made of frames with different hardness sponges. Many American sofa seats are still designed with springs and sponges, which makes the sofa very durable. Before buying this kind of sofa, you must measure the living room area. Generally speaking, only the large living room of 20 square meters or more can consider buying such a sofa.

(2) Japanese-style sofas, the biggest feature of Japanese-style sofas is its small fence-shaped handrails and short design. Such a sofa is best suited to people who admire the natural and simple home style. The compact Japanese-style sofa reveals a rigorous attitude towards life. Therefore, Japanese-style sofas are often used by some office spaces. This type of sofa is also suitable for the elderly. Because for some elderly people who have difficulty in walking and sitting, the hard Japanese sofa makes them feel more comfortable and it is more convenient to sit up.

(3) The Chinese-style sofa, the Chinese-style sofa is characterized by the entire exposed solid wood frame. The upper sponge cushion can be replaced as needed. This flexible way makes Chinese sofas popular with many people; it is cool in winter and cool in summer, convenient and practical.

(4) Modern and avant-garde European-style sofas, European-style sofas with modern styles are mostly elegant in color and simple in line, suitable for general household selection. This kind of sofa is also suitable for a wide range of applications, and it feels good to be placed in various styles of living rooms. Popular in recent years are light-colored sofas: white rice, beige, etc. The sofa is divided into fabric sofas, leather sofas, leather sofas, etc. according to different materials.

Soft bed picture bed is common in the market with bed sets and mattresses. In fact, the bed mainly looks at the mattress. Nowadays, the mattress is more and more focused on comfort and practicality. The main components are spring, sponge and outer fabric. At present, the mattresses on the market are uneven, there are several hundred yuan, and there are also tens of thousands of yuan. For example, Lizian has a mattress that is imported from Australia and is called Denglupu. His mattresses are all over 10,000 yuan. Nowadays furniture is paying more and more attention to decoration, and the bed is no exception. From the background wall of the bed, the decoration and decoration of the bedding, it is very luxurious, and it has a desire to buy. Now it is not only a good mattress. Bad, attention to the overall feeling, the sweet dream of the Octagon store is a good example.

5, rattan furniture Most of them will be refined into three series of bedroom, living room, garden, both European and American models of rough luxury, Southeast Asian style exquisite and delicate, but also has a simple and elegant Chinese traditional culture. In addition to its practicality, the designer emphasizes its artistry and becomes a veritable fashion furniture. Throughout the major furniture market, the current rattan furniture on the market is basically divided into the following categories: outdoor furniture, such as gardens, small round tables on the veranda, armchairs, recliners, etc., as well as swinging sofa armrests full of casual atmosphere. Chair, lots of fun;

The living room furniture is the most perfect and most styled in rattan furniture. A set of living room furniture made of red rattan core is delicate and smooth. The shape and color are simple and elegant, and the craftsmanship is beautiful. The restaurant furniture is especially structured and colorful. The combination of the elegant and artistic features. The five-piece and seven-piece rough rattan chairs and tables are novel and contemporary. In addition, the small ornaments of rattan are also in a variety of poses. The rattan table lamp has a chic shape, soft light, warm and elegant. The rattan chandelier is simple and monotonous, and is in harmony with the modern style of pursuing nature. Occasionally, a few pieces of rattan furniture are set up in the modern family. It is beautiful and traditional, and it is a bit plain in fashion, reflecting the style and taste of the owner.

In terms of color, the colors of modern rattan furniture are poetic, silvery, quiet, bronzed, reddish brown, dark green, mysterious, crystal clear, smooth and round. More lacquer is transparent, maintaining the unique style of the rattan itself. Its natural and simple nature makes people who are tired of the bustling and noisy city naturally find the feeling of comforting the soul. At present, the most well-known Tengbo brand in China should belong to Yitengju, Ming Tengxuan and Jade Teng.

Other Welded Fence

Fence Designs,Mesh Fence Designs,Wire Fence Designs

Shunxing Hardware Wire Mesh Co., Ltd. , http://www.rywiremesh.com