Personnel: It usually requires 1-2 bricklayers. 1, paving color glazed tiles: Essentials for Construction of Ceramic Tiles Tile paving tile entrance decoration cement home window furniture floor tile The quick stacking door has many functions such as heat preservation and cold preservation, insect and wind prevention, dust insulation and sound insulation. Widely used in underground parking lots, industrial plants, food, textiles, electronics, printing and packaging, automotive assembly, precision machinery, logistics and warehousing and other places. Automatic Stacking Doors,High Speed Security Door,Rapid Stacking Folding Door,Automatic Stacking PVC Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffastdoor.com
Order: first put wall tiles, then paste tiles.
Time: A good bricklayer sticks 5-6 squares a day, otherwise it is difficult to guarantee quality. Especially in the case of windowsills where small diagonals are needed, it is time consuming.
Treat grassroots → bullets → tile soaking wet → spread cement mortar → install standard block → paving bricks → sew → clean → curing.
2, paving ceramic mosaic tiles (mosaic) categories:
Deal with grassroots → elastic line, marking bar → paving cement mortar → paving → tapping → sprinkling, peeling paper → picking, filling, cleaning → cleaning.
Qijia decoration tips:
1. The concrete floor should cut the base layer, cut the hair to a depth of 5 to 10 mm, and cut the distance between the cuts to be about 30 mm. After that, clean the floating ash, mortar, and oil stains, and produce scattered water to sweep the ground.
2. Before the paving, a good line should be played. On the ground, a reference line at right angles to the doorway opening should be popped. The line should be started from the entrance to ensure that the entrance is a whole brick, and the non-complete brick is placed under the overcast or furniture. The vertical and horizontal positioning control lines appear.
3, before laying ceramic tiles, ceramic tiles should be soaked in the shade.
4. When laying, cement mortar should be fully applied on the back of the ceramic floor tile. At the same time, use a level ruler to check and correct and wipe the surface cement mortar.
5. After 2 to 3 hours of paving, use white cement to wipe the joints. Use cement mortar and sand=1:1 (volume ratio) cement mortar. The joints should be densely packed and smooth. Wipe the surface with cotton again.