Tile cement tile adhesive kitchen tile Industrial Grade Ammonia Solution Industrial Ammonia,Ammonia Solution,Liquid Fertilizer Linqu Hengchang Chemical Co., Ltd. , http://www.hcammoniasolution.com
Tiles or uneven wall tiles are first cleaned and wetted on a flat surface, and are primed with 1:3 cement mortar, 6 mm thick. The walls should be slightly hairy but they must be flat. To calculate the number of vertical and horizontal blocks, set a horizontal grid. Paste the tiles every 3-4 days after the bottom. When tiling, first wet the wall with water, place a pad ruler at the bottom of the bottom layer of the tile, and the ruler pad must keep the horizontal line and fix it.
Tiles should be pre-saturated with water and taken out to dry slightly. Adding a proper amount of 3-4% 107 glue in 1:2 cement fine sand can improve the workability of the mortar. Slow down the clotting time. To facilitate the paste and prevent mortar from flowing. Apply the mortar to the back of the tile, tap the wall and tap the brick surface with a rubber mallet to fill the mortar. After pasting the bottom layer of tile, place the vertical ruler as a vertical standard. When the paste is generally started from the angle of the sun, so as not to complete the alignment of the tiles in the seam. All the vertical and horizontal seams must be aligned. The mortar on the brick surface should be wiped off when it is dry. After the paste is applied, it should be rinsed with clean water, and the seam should be wiped with white cement.
Lay a tile on the plastering plastering wall to find the vertical and horizontal reference lines on the wall, calculate the number of layers, and paste it with cement paste mixed with 5-7% 107 glue. If the wall surface is very smooth, first use a pure cement slurry to sweep it again and start to paste it when it is not dry. Because the adhesive layer is not mixed with sand, it is very thin, only 2-3 mm thick, easy to flatten when bonded, so this is a very convenient and economical method.
How to paste the most secure tiles
Tiles have a good waterproof and anti-warping properties, the surface is smooth and beautiful, easy to clean, suitable for use in the kitchen and bathroom.