Tile switch socket faucet Block Magnet,SmCo Magnet,Block SmCo Magnet SDM Magnetics Co., Ltd. , http://www.lg-magnets.com
1. Switch, socket can not be installed on the tile and waistline of the tile.
2. Switch, socket bottom box in the tile opening, the border can not be more than 2mm above the bottom box, can not be opened into a round hole. In order to ensure the installation of switches and sockets at a later date, the bottom edge of the box should be flush with the tiles as far as possible so that no longer a longer screw can be found during installation.
539) {this.resized=true; this.width=539;}" border=0 resized="true">
3. Install the switch, socket location can not have more than two tiles were destroyed, and try to make it installed in the middle of the tile.
539) {this.resized=true; this.width=539;}" border=0>
4. The opening of the mounting faucet must be opened into a round hole, not a square hole, and it cannot be opened into a "U" type, and a piece of "U" shaped hole is added. The size of the opening cannot exceed 2 mm of the pipe diameter. Above, and the outlet must also be flush with the tile.
539) {this.resized=true; this.width=539;}" border=0>
Tile wall mounted switch faucet to pay attention to details (Photos)
The exquisite construction process is often reflected in some details. It is like installing switches, sockets and faucets on the walls of kitchen tiles. It looks as if they are inconspicuous, but it directly affects the beauty of the living room. Therefore, attention should be paid to the following matters during construction: