1. Wire glass is typically packaged in containers, pallets, or wooden crates. Each individual piece is wrapped in plastic bags or paper, and the glass and packaging are cushioned with soft materials to prevent scratches. The packaging should clearly indicate "face up" and include the thickness of the glass for proper handling. Each package should also be labeled with relevant information such as the product name, specifications, type, and brand. This ensures proper identification and usage during transportation and installation. Wired glass is a special type of safety glass that contains a wire mesh embedded within it, offering enhanced structural integrity and fire resistance. 2. When transporting wired glass, it must not be laid flat or placed at an angle. The glass should be aligned with the direction of the vehicle, and all shipments must have proper rain protection. During handling, care must be taken to avoid collisions with hard objects that could damage the glass. If the glass is not used immediately, it should be stored in a dry room, placed upright on an A-frame rack, tilted between 5 to 10 degrees from vertical, and secured with ropes to prevent falling or shifting. 3. Before installation, the glass should be protected from high temperatures, direct sunlight, and rain. At the construction site, it should be kept in a well-ventilated and dry area. In case of sudden weather changes or heavy rain, workers should inspect the site regularly to ensure that the packaging boxes are not soaked and that water does not seep into the edges of the wire mesh, which could cause corrosion or damage over time. 4. During installation, brushed glass should be handled with care and not forced into place. The window frame should be made from high-quality, rust-resistant materials, and the thermal expansion differences between the glass and frame should be carefully considered. The dimensions of the glass and the frame must match precisely, with the glass slightly smaller than the opening. The depth of the glass groove in the frame should meet the required standards. The frame should also be designed to allow quick drainage of rainwater and condensation, keeping the glass dry and preventing moisture buildup. 5. The metal frame should never come into direct contact with the glass. Instead, high-quality sealing materials should be used to fill the gap between the glass and the frame. It is important to ensure compatibility between the sealing material and the PVB film, especially if the glass contains one. Silicone rubber or polysulfide rubber are recommended for their durability and flexibility. All installation procedures must follow the guidelines set forth in the national mandatory industry standard JGJ113-97 Technical Regulations for Building Glass Applications, ensuring both safety and compliance with building codes. Led Tube Emergency Kit,Led Emergency Kit,Emergency Kit For Led Tube,Emergency Pack For Led Tube JIALINGHANG ELECTRONIC CO.,LTD. , https://www.jlhemergencylighting.com