Guangdong Kinen Sanitary Ware Industrial Co.,Ltd. , https://www.kinengroup.com
Maintenance method that materials are temporarily unused after buying home
During the renovation process in the plum rain season, it's crucial to ensure proper ventilation, drying, and protection of materials. The storage area for these materials should be as dry as possible. If needed, air conditioners or dehumidifiers can be used to control humidity in the storage space. Unused wood should be properly wrapped in plastic packaging to prevent moisture from entering and causing damage. One common issue with single-layer solid wood flooring is warping or deformation.
The deformation of tiles on wooden floors typically occurs because multiple layers of paint seal the wood fibers, creating a hard surface layer that resists expansion. However, when moisture is absorbed from the bottom of the board, it causes the board to expand, while the top surface remains unchanged. This mismatch leads to tile-like deformation. Newly delivered residential walls and slabs often have a moisture content above 30%, and even after several years, the moisture trapped inside due to closed windows and doors can still be problematic. When dry wooden floors (with moisture content below 12%) absorb moisture, their bottom expands, leading to deformation that cannot be stopped by nails alone.
Whether it’s a new or old building, serious tile deformation can occur in open areas like halls. During interior decoration, water from bathrooms, kitchens, and other wet areas often seeps into the floor. Even though the surface appears dry, there is still significant moisture beneath. This moisture is absorbed by the bottom of the dried wooden floor, causing it to expand and deform. Some people try placing plastic or foam film under the floor, but if the film has holes or isn't properly sealed around the edges, moisture can still enter, especially under the baseboards. The moisture from the surrounding environment can also penetrate into the board’s bottom. Since a moisture barrier is usually in place, the moisture can’t escape and instead gets absorbed by the wooden floor, leading to deformation. This is particularly common with single-layer solid wood flooring that hasn’t been properly dried.
In reality, most single-layer solid wood flooring available on the market meets national standards. If dry shrinkage cracks appear, it’s not necessarily the fault of the product. To avoid quality issues after installation, it’s better to avoid using traditional wooden keels. Instead, polystyrene extruded insulation boards are a better option—they are easier to install without nails, provide insulation, and are resistant to moisture, corrosion, and wear. They also offer good elasticity. Choosing scientifically designed and practical solid wood flooring can enhance your home’s appearance and performance without worries. This is especially important for project designers and those with high-end renovations.