Statement 1: Is a thicker board always better? During the visit, the reporter noticed that many salespeople emphasized that thicker furniture panels mean better strength. After personally testing it, the reporter found that some large-brand flat-panel wardrobes had sliding doors that felt thick and sturdy. In contrast, cheaper products often felt light and unstable. But can the weight of a board really determine its quality? According to experts, Luo Wei, director of the National Center for Quality Supervision and Inspection of Furniture and Indoor Environment, explained that while thicker boards may have higher theoretical strength and better nail-holding power, consumers shouldn't overemphasize thickness. He pointed out that particleboard has specific density standards in national regulations. As long as it meets those standards, it's sufficient. For table tops, a thicker board might give a sense of solidity, but for wardrobe doors, which are mainly for coverage, excessive thickness isn't necessary. Some boards look thick on the outside, but actually contain a multi-layered structure inside. “There could be hollow spaces,†Luo said. “If it’s solid, it would be too heavy, which isn’t needed.†Additionally, he warned that overly thick boards could put extra stress on hardware components, potentially reducing their lifespan. Statement 2: Can wear resistance be tested with a key? Several salespeople demonstrated the durability of their boards by scratching the surface with a key and showing that no marks were left. They also used a marker pen to write on the furniture and wiped it off easily to prove good stain resistance. However, according to experts, the national standards set strict requirements for both wear resistance and stain resistance. Luo Wei explained that the demonstrations shown by salespeople only reflect the minimum acceptable performance. Actual testing involves more rigorous conditions—such as exposing the surface to different types of stains like soy sauce or lipstick for a certain period before checking the effect. Statement 3: Are imported boards really better? When purchasing sheet furniture, many consumers struggle between domestic and imported boards. Some salespeople highlight that “imported boards have the best environmental performance,†though they usually come at a higher price—about 20% more than domestic ones. Experts say that from a quality perspective, current large-scale domestic boards are not worse than some imported ones. All boards that meet national standards are safe and functional. While some exporting countries may have stricter quality control, leading to more stable products, Luo Wei advises consumers not to be overly superstitious. Instead, they should choose based on their budget and needs. Statement 4: Does neat edge sealing prevent formaldehyde release? Some salespeople show customers the edges of their furniture, claiming that tight edge sealing prevents formaldehyde from escaping. They warn that if the edge is damaged, formaldehyde could leak out. Experts clarify that while tight edge sealing may slow down formaldehyde release, it doesn’t stop it entirely. Even with perfect sealing, formaldehyde will still be released over time, just at a slower rate. If the edge is damaged, the release speed increases, but the total amount remains roughly the same. Luo Wei added that edge sealing mainly affects aesthetics and helps protect the board from water damage and swelling. Engineered Wood Flooring,Spc Flooring Cutting Tools,Spc Flooring For Libraries,Spc Flooring Sample Box Changzhou Yingda New Material Co., Ltd , https://www.yingdaspc.com