A toilet is one of the three essential elements in a bathroom and plays a key role in overall bathroom design. Choosing the right toilet can enhance both the aesthetics and functionality of your space. To help you make an informed decision, we’ve gathered some useful tips to guide you through the process of selecting a suitable toilet. Testing the Flushing Performance After Installation One simple way to check the flushing effectiveness is by dropping a cigarette butt into the toilet. If it goes down smoothly without making much noise, it’s a good sign that the flush works properly. Using Toilet Shifters 1. When to use: These are useful when the distance between the waste pipe and the wall is too short.
2. How much to shift: Ideally, no more than 10cm. It's generally not recommended unless necessary.
3. When to install: The floor tiles should already be in place before installation. Not Clogged, Not Blocked The design of the toilet’s internal piping significantly affects its tendency to clog. A straight-flush toilet has a direct path, making it less likely to get blocked compared to a siphonic model. Siphonic toilets have a smaller diameter (around 56mm), which makes them more prone to blockages. Some people joke that if you install a siphonic toilet, you’ll need a paper basket and tweezers to deal with the aftermath. It’s also better to choose a toilet with unglazed inner walls, as glazed surfaces can trap dirt and increase the risk of clogging. Glazed models tend to be more expensive but may not always be the best choice for hygiene. Water Splashing Issues No one wants to deal with water splashing when using the toilet, whether it’s a hygiene or psychological concern. The main factor affecting splashing is the height of the toilet seat. Higher seats lead to faster water entry and more splashing. Research shows that when the seat height is above 200mm, splashing is more common, while below 140mm, it’s rare. The ideal height is around 160mm. This is determined by the difference between the seat height and the water seal level. Most modern toilets are ergonomically designed, so the water seal becomes the critical factor in preventing splashes. A good toilet should have a water seal of at least 55–60mm, which meets or exceeds the national standard of 50mm. Flushing Effectiveness Some European-style toilets feature a straight-through design, following British standards. They have a shorter, wider pipe (typically 90–100mm), allowing gravity to assist in flushing. This makes them efficient for removing waste. In contrast, siphonic toilets have a longer, narrower pipe, creating a stronger suction effect but requiring more water. These models often need at least 8–9 liters per flush. If you reduce the water volume to just 3–6 liters, the flush may not be effective. While 3/6-liter dual-button toilets save water, they may not clean as thoroughly as traditional models. Each type has its pros and cons, so it’s important to consider both performance and efficiency. Water Saving Features A toilet’s water-saving capability depends on two main factors: the tank and the bowl. Straight-flush models typically use less water than siphonic ones. Water-efficient toilets usually use less than 6 liters per flush, but this can sometimes result in less effective cleaning. However, dual-flush models—using 3 liters for urinals and 6 liters for bowls—are more balanced. Compared to older 9-liter models, these can save up to 1,890 liters of water per month for a family of three. That’s a significant reduction in both water usage and wastewater output. Explosion-proof Nylon Fan Blade Explosion-Proof Nylon Fan Blade,Excavator Cooling Fan Blades,Explosion-Proof Fan Blades,Plastic Axial Fan Blades Changzhou Keyleader Fan Technology Co. Ltd. , https://www.keyleaderfan.com