The toilet is one of the most essential elements in a bathroom, playing a key role in both functionality and aesthetics. Choosing the right toilet can make a big difference in your daily comfort and long-term maintenance. A high-quality toilet not only enhances the look of your bathroom but also ensures smooth and efficient performance. Here are some useful tips to help you select the best toilet for your home. Testing the Flush Performance After Installation One simple way to test the flush performance is by dropping a small object like a cigarette butt into the toilet. If it goes down smoothly without making much noise, the flushing system is working properly. This quick test can give you an idea of how well the toilet handles waste. Using Toilet Shifters 1. When to use: A toilet shifter is useful when the distance between the floor and the waste pipe is too short.
2. How far to move: It's generally recommended not to shift more than 10cm. Moving it too much may cause installation issues.
3. When to install: The floor tiles should be fully installed before shifting the toilet to ensure proper alignment. Not Clogged vs. Clogged The design of the toilet’s internal pipe plays a big role in whether it gets clogged easily. A straight-flush toilet has a direct path with no water trap, which makes it less likely to get blocked compared to a siphonic model. Siphonic toilets have a narrower pipe (around 56mm), which can lead to blockages, especially if large items are flushed. Some people joke that siphonic toilets come with a paper basket and tweezers as "essential accessories" due to their tendency to clog. To avoid this, choose a toilet with a smooth inner surface that’s easy to clean. Glazed surfaces are more expensive but also more hygienic and less prone to buildup. Water Splashing Issues Nobody likes getting splashed by water while using the toilet. The height of the toilet seat is a major factor in this issue. The higher the seat, the faster the water hits the bowl, increasing the splash. Research shows that when the seat height is above 200mm, splashing becomes more common. For better performance, aim for a seat height below 140mm. The ideal height is around 160mm. To check the water seal, fill the bowl until water starts to flow out of the drain. Measure the distance from the water surface to the bottom of the bowl. National standards require at least 50mm, but better models offer 55–60mm, which reduces splashing significantly. Flush Not Clean Enough? Some European-style toilets use a straight-flush design, which is efficient and uses gravity to clear waste quickly. These models typically have larger pipes (90–100mm in diameter) and require less water. In contrast, siphonic toilets have longer, narrower pipes, which create a stronger suction but require more water—usually 8–9 liters per flush. If you reduce the water volume to just 3–6 liters, the flush may not be effective. That’s why many users report that low-flow toilets don’t always clean well. However, modern dual-flush models (3L for urinals, 6L for bowls) offer a good balance between efficiency and cleanliness. Water Saving or Not? Water-saving toilets depend on two main components: the tank and the bowl. Straight-flush models tend to use less water than siphonic ones. A toilet that uses less than 6 liters is considered water-efficient, but it may not clean as thoroughly. The best option is a dual-flush model that allows different amounts of water for different uses. For example, a family of three could save over 1,800 liters of water per month by switching from a 9-liter toilet to a 3/6-liter model. This not only saves money but also reduces environmental impact. Construction Machinery Fan Blades Construction Machinery Fan Blades,Axial Fan Blades For Harvester,Low Noisy Fan Blades,Engine Cooling Fan Blades Changzhou Keyleader Fan Technology Co. Ltd. , https://www.keyleaderfan.com