10W Mini Glue Gun Ptc Heating Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of
standards to ensure a robust and long life, we hope it provides you with many
years of trouble-free, safe and reliable service.
General Safety Information:
1. Check
if the plug cord was in good condition, and if there is stand before plug into
the electrical outlet ; Check if the used glue gun has glue flow through back
of the tunnel;
2. wait
5-10 minutes to allow glue to soften, stand up the glue gun on the table when
not in use;
3. Touch
nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop
the nozzle;
4. If the glue could not flow from the nozzle when
the glue gun start to work, check if the glue gun are heating;
If glue
gun can not be heated, there are following reasons:
If glue
gun can be heated, there are following reasons: Nozzle has been stopped by any
impurity, ask careerman to manage it.
5. Do not use the glue gun
under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle
or melted glue;
7. Do not remove out the melted glue stick from
the tunnel back side, it will damaged the glue gun as well as scalding person
hands.
8. Do not to disassemble or assemble any glue
gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it
beyond any of Children palpable side;
10. Only used for melting glue stick, no other
usage;
11. When in use, there are any glue flow back
from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use
after 15 minutes;
Important
Caution:
1.
Before use the glue gun, check
if the plug cord into electrical
outlet properly;
2. When glue gun
in first use, the heating element will have small smoke, it is normal
situation, but the smoke will disappeared after 10 minutes;
3. After power,
not for a long time in standby mode(not longer for 20 minutes), when the
suspension of use, unplug first.
4. Avoid to use
the glue gun under very hot or very cold environments.
5. Better not
work under direct cold wind blowing, it will reduce efficiency and loss power
6. When in
continuous using, do not press the trigger with great pressure, and try to
squeeze out the un-melted glue, it would damage the glue gun
7. Not
applicable for bonding heavy objects or objects needed strong adhesive
8. The quality
of glue stick will directly influence the glue gun function and sticking
objects quality;
9. If the
power cord is damaged, do not replace it by yourself, must ask for
professionals to replace it.
10. This tools must b e placed in its position when
not in use. And storage before the tools complete cooled.
11. Be careful when using any other electrical appliance
with flammable material.
12. Not applicable for a long time in the same
place.
13. Do not use an explosive gas atmospheres.
14. Note that heat may be the line of sigh, combustible
materials.
15. Do not leave equipment unattended when switched
on.
16. This appliance is not intended for use by
persons(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
17. Children should be supervised to ensure that
they do not play with the appliance.
Using methods
1. Glue gun
using voltage is 110-220V AC,50/60Hz;
2. Tip gun
forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm
(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks
through
4. After power,
wait for 5-10 minutes to allow glue to soften
Mini Glue Gun 10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com
1 Acetochlor. After germination, acetochlor or its compound preparation (such as thiabendazim) can be used in 3-4 days after the drug, and it is easy to appear incomplete or no seedlings. .
2 isoproturon. The application period is wide, and it can be applied from pre-emergence to pre-union of wheat, but the herbicidal effect is the best before weed emergence to the third leaf stage. Severe frosty weather within half a month after the application of isoproturon may cause heavier phytotoxicity to wheat that has not been subjected to low temperature training, and wheat seedlings may have leaf chlorosis and growth inhibition. Severe frost appears in a short time after application, and wheat is more seriously damaged, and even dead. The application of isoproturon and its compound preparation in the wheat field generally requires no daily minimum temperature of less than 0 °C within 1 week after application.
3 methyl disulfuron. Some wheat varieties may have temporary yellowing or dwarfing in the early stage of growth. Generally, the yellowing phenomenon will naturally disappear after the rejuvenation, and the dosage will exceed the standard. Improper application may cause serious phytotoxicity. The damaged wheat seedlings will yellow and grow. Suppressed, severe dry dead seedlings. After over-application in spring, the wheat seedlings can not resume growth for a long time, which will seriously affect the differentiation of wheat ears and timely heading. Therefore, the application in spring should be more cautious.
4 acetylene ester. When the dosage of the active ingredient per acre reaches 135 grams, it will obviously inhibit the growth of wheat seedlings, but the wheat seedlings can recover quickly. If the temperature is low after application, especially in the case of continuous cold weather and large temperature changes, the phytotoxicity is more likely to occur. The growth of wheat seedlings was inhibited. Even after the application of clodinafop in winter and spring in some years, the yellowing of wheat leaves after application resulted in a large number of dead seedlings.
5 fluoxetine. A safer broadleaf weed herbicide, in a drug-resistant plant such as wheat, the drug can bind to the conjugate to lose toxicity and thus be selective. However, if the dose is blindly increased, it is prone to phytotoxicity. Generally, symptoms will appear 2 to 3 days after application. The main manifestations of wheat are yellowing, plant deformity, and distortion. For example, 450 g/L of flupiroxyacetic acid emulsifiable concentrate per acre may cause serious phytotoxicity to wheat. There are even dead seedlings. Therefore, the general safe use dose is 50 ml to 70 ml.
6 2 A 4 chlorine. Before the 4 leaf stage of wheat, 2 to 4 chlorine was used, which was prone to phytotoxicity and formed onion tube leaves. After the jointing of wheat, it is easy to cause the onion tubular curl and the ear deformity.
1
Plug cord into electrical outlet not
properly;
2
Glue gun has been destroyed owing to
inner cord short circuit;
tunnel at back of gun
Wheat field herbicide remedy
Before the winter wheat field was removed, it was particularly important to avoid the risk of phytotoxicity.
ã€Comment】 ã€Print this article】 ã€Close this page】 ã€Large, medium and small】