Fireproof Glass,Tempered Fireproof Door,Fireproof Glass Windows,Fireproof Interior Door Huaian Hongrui Glass Co.,Ltd , https://www.hongruiglass.com
Submission:
Commissioning skills for small feed pellet machines
When commissioning a small feed pellet machine, start by preparing a mixture of 10 kg of feed or rice bran. Add 1-2 kg of vegetable oil and mix thoroughly. Then take a small portion of about 3 kg and add an additional 0.5 kg of vegetable oil to create a moist mixture. This initial batch will be used to prepare the machine for operation.
Once ready, place the small pile of feed into the machine. Turn on the feed pellet machine and immediately adjust the two "adjustment screws" to control the pressure roller and the die. The ideal gap between the die and the roller should be between 0.1 to 0.3 mm. As the pellets are extruded, continue feeding the machine with the oily mixture. If the feed doesn’t pass through smoothly, stop the machine, remove any blockage from the die hole, clamp the steel nails in a vise, and repeat the process until the flow becomes consistent. Perform this step 15 to 30 times to ensure the die hole is properly lubricated and smooth.
After the 30th cycle, allow the oily feed to remain in the die hole for a while, ensuring it stays well-lubricated. For the next round of processing, add a small amount of oily feed first. Follow the same procedure, and after a few batches, you’ll be able to process feed without the need for extra oil in the future.
This method ensures the machine runs smoothly and reduces wear on the components. Proper preparation and gradual running-in of the die are essential for long-term performance and efficiency.
Http://news.chinawj.com.cn